Cisco Client Linux

Installing the VPN Client

  1. Download the Anyconnect VPN client.
  2. From the Terminal, navigate to the Downloads folder and unzip the file by typing [tar xzvf anyconnect-xxx.tar.gz]
    • NOTE: The *actual* file name will contain the name of the current version of the installer (e.g. anyconnect-linux64-4.5.03040-predeploy-k9.tar.gz)
  3. A folder with the same name as the file will appear in the current directory. Open the folder and then go to the vpn directory, and once you are there type [./]
  4. The VPN clientwill be installed on your system and the vpnagentd process will be started. This process will be started each time your system is booted.
  5. NOTE: Ubuntu/Debian users should run this command to download a dependency for the VPN UI: [sudo apt-get install libpangox-1.0-0]

Cisco VPN client configuration files are in /etc/CiscoSystemsVPNClient.ini files are normally OK and can be left as they are. A connection profile containing several essential parameters however is needed to make a particular VPN. An openconnect VPN server, which implements an improved version of the Cisco AnyConnect protocol, has also been written. OpenConnect is released under the GNU Lesser Public License, version 2.1. Development of OpenConnect was started after a trial of the Cisco AnyConnect client under Linux found it to have many deficiencies. Cisco VPN client in Linux. Connecting to a network using Cisco VPN is quite easy. I’ve got it with Fedora 7, but I suppose the steps are the same regardless the distribution you are using. The first step is to install a Cisco compatible VPN client. Cisco has a client, but there’s a free alternative called vpnc. To install it in Fedora, just. I am currently using Windows XP with Cisco VPN Client version I would like to replace Windows XP with Linux, either Red Hat version 5.x or 6.x. My question is, what equivalent VPN software can I install on Linux machine in order to get full compatibility with the same VPN network that the Cisco VPN client uses.

Starting the VPN Client

  1. To start the client from the terminal, type [/opt/cisco/anyconnect/bin/vpnui]. Note: if you are not running a GUI, you can enter interactive mode by entering[/opt/cisco/anyconnect/bin/vpn]
    • NOTE: If you are using a desktop environment, you should be able to find the client in one of your menus as well (e.g. in a RHEL environment, look in Applications -> Internet).
  2. In the “Connect to:” box, type and press Return on your keyboard. Note: in interactive mode type [connect]
  3. In the “Group” menu that will appear, select the tunnel you wish to use, usually “UCI” or “UCIFull”. (See the differences in the Tunnels below.)
  4. Enter your UCInetID and password in the appropriate boxes and click “Connect”.
  5. You should get a banner box. When you do, click “Accept” and you are now connected.

Possible Error Messages

If you get one of the following messages when you try to connect to the campus VPN service:

  • “Connection attempt has failed due to server certificate problem”
  • “AnyConnect cannot confirm it is connected to your secure gateway”

this means that the AnyConnect client cannot validate the certificate on the campus VPN service.


To remedy this, please download and unzip this file and follow the directions in the README file to install the InCommon certificate files on your system.

Ubuntu Linux

If you are using Ubuntu Linux and are having problems using the VPN, Jeff Stern has instructions for making the AnyConnect VPN work on Ubuntu. See for more information.

Linux Openconnect Client

Note: Using the Linux openconnect software is not supported by OIT. If you have problems using this, OIT will not be able to help you. These instructions are provided for you if you want to use something other than the supported Cisco AnyConnect client on your Linux system.

Linux Cisco Vpn Client

Some Linux distributions include a VPN client called openconnect that can be used with the the UCI VPN service. The instructions below are for Fedora Linux. Other distributions may be similar.

Cisco Webex Client Linux

  1. From the terminal, type [sudo openconnect -u UCInetID]
    • replace UCInetID with your actual UCInetID
    • if you don't have openconnect installed, you can download it from your distro's software repo [e.g. sudo apt-get install openconnect]
  2. You will be prompted for the Group to use. Type one of the options, usually UCI or UCIFull (it's not case-sensitive)
  3. You will be prompted for your password. After you give the client your password you will be logged in.

You can minimize the terminal window while you do your work (don’t close it or you will lose your VPN connection). When you are done type ^C (control-c) to terminate openconnect and your VPN session will be logged out.

(Jeff Stern has also written a page on setting up Openconnect for Debian/Ubuntu users, at